Is your little Strider rider getting taller? Strider's Extra-Long Seatpost w/Saddle extends your child's Strider Bike (sold separately) saddle height another three inches to a maximum of 19 inches off the ground. Recommended for children over four years old, it easily replaces the standard seatpost and saddle.
$164.00 - $175.00
Cane Creek's Thudbuster Seatpost adds comfort to any hardtail bike. Using a parallel-linkage design, the Thudbuster moves down and back at the same rate as the rear wheel moves forward and up when you hit a bump, helping you maintain control. The post and linkage is made of aluminum with Teflon coated steel bushings so you know it's built to last. And, the interchangeable elastomers (sold separately) can be easily exchanged to your preferences.
Easton's EC70 Zero Seatpost provides the low weight, strength and durability you're looking for. It utilizes vibration-damping carbon for a smooth, buzz-free ride, while Easton's Relief Area Design enhances strength without adding excess material. And, the EC70 features an easy-to-use, micro-adjustable two-bolt clamp to help you find your perfect position.
Profile Design's 1/Zero seatpost is the choice when you need the most aggressive position possible. Zero setback rails place you squarely above the bottom bracket for maximum power. The 2-bolt head enables micro-adjustments to your position and eases installation. The clamps evenly distribute pressure, reducing stress on carbon saddle rails.
• Aluminum • Coil spring suspension • Adjustable pre-load design • Collar adjustment for play removal • 7/8-inch seat-clamp diameter
- 6061-T6 construction w/forged alloy head - 45mm adjustable preload suspension travel - 2-Bolt Zero Offset head clamp - Up to 300 lb rider weight - EN MTN safety approval - 385g (27.2mm x 350mm)
Trek-compatible seat mast cap Offered in white and black and a variety of lengths and offsets, the mast cap includes hardware compatible with round saddle rails only. 7x10mm carbon rail-compatible hardware sold separately. Key features: - Ultra-light carbon construction - One bolt head design offers easy fore-aft and infinite angle adjustment - Compatible with all Trek road bikes with round seat masts - 175mm and 135mm lengths - 5mm and 20mm offsets - Aluminum clamp
- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post - Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head - Angled clamp bolts allow easy tool access for hassle free adjustment and tightening - The rubber seatpost grommet fully seals the post to prevent water entering your seat tube - Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon - Wide lower cradle gives extra rail support for lightweight saddle rails - Narrow upper cradle increases the amount of forward/back saddle adjustment - Tilt Adjustment 6° up 12° down with Zero offset
• Aluminum • Coil spring provides plush suspension • Adjustable pre-load design • Micro-adjust seat clamp • 450 grams
Ritchey's Classic Seatpost uses a proven 2-bolt design that provides a class-leading balance between strength, weight, and adjustability. - Ritchey's "Classic" hi-polish silver finish - Two-bolt design for easy to adjust, vise-like grip - Low profile clamp reduces stress on lightweight rails and won't bottom out - Bolts oriented to the axis of the rails for greatest contact area with the saddle - 3D Forged 2014 - Available in 27.2, 30.9 and 31.6mm diameters - Length: 350mm - 25mm offset - 43x38mm cradle - Hi-polish silver finish - 245g (27.2/350mm)
Odyssey is proud to offer their new tripod post. It allows for the two most popular seat angles amongst riders and it’s clean, light and easy to install. SPECS - 25.4mm diameter - 6061-T6 Aluminium, CNC machined
Ritchey's Comp Link reimagines the two-bolt post, making it lighter, more compliant, and more versatile than ever. The patented LINK clamp works with all standard saddle rail designs as well as Ritchey Vector Evo rails. - 6061 aluminum 2-piece press-fit construction - Diameters: 27.2 and 31.6mm - Offset: 20mm - Reversible clamp allows for an additional 10mm of fore-aft saddle adjustment - Length: 400mm - 284g (27.2x400mm)
TruVativ's 6061-aluminum post lives up to the Hussefelt name, which promises performance, value and the ability to handle what the terrain dishes out. Specifically designed for the rigors of DH and freeride, it’s dependable, super-adjustable, and aggressively styled with bold graphics to match your ride.
Black Label's Pivotal Seatpost keeps things light and simple. It's short, made of lightweight and tough nylon, and accepts pivotal seats (sold separately). - Weight: 95g
3T's ultra-light carbon Stylus road seatpost is a fresh take on the standard 2-bolt post. The transition from the pillar to the saddle clamp assembly is a finned, rearward swoosh suggestive in shape of the classic one-bolt posts of yore. But the clamp bolts are deployed to either side of the saddle-support cradle, conferring greater stability and easier adjustment. Stylus–0 models place the seat clamp assembly in line with the seatpost for zero setback for a forward position on the bike.
Easton's EC90 Seatpost is super light and amazingly strong. It's crafted from Easton's high-tech carbon for maximum stiffness and a premium ride. Plus, it even features carbon clamping pieces for the ultimate in lightness, while Easton's RAD and TaperWall technology distributes stress along the length of the post so it's insanely strong as well.
Easton's EA50 Seatpost is rugged, reliable and perfect for all your cycling adventures. It's made from 2014-aluminum with Easton's TaperWall technology that controls the post's internal thickness, adding material where you need it and none where you don't. It provides excellent strength and durability while keeping the weight low. Plus, the EA50 boasts an easy-to-use 2-bolt clamp for secure seat adjustments.
A sweet upgrade for your ride, Easton's EA70 Offset seatpost is a proven staple of strength and reliability. It's built with Easton's TaperWall technology, which customizes the thickness of the aluminum walls to optimize strength without excess material. And, the integrated two-bolt clamp allows for precise, easy seat adjustments.
Easton's EC90 Seatpost is super light and amazingly strong. It's crafted from Easton's high-tech carbon for maximum stiffness and a premium ride. Plus, it even features carbon clamping pieces for the ultimate in lightness, while Easton's Relief-Area Design (RAD) enhances strength where the frame clamps the post.
- Alloy mast with micro clamp aluminum head - One bolt adjusts tilt and fore-aft saddle position (no-offset clamp) - I-Beam single rail clamp post specific to I-Beam saddles
$26.99 - $27.99
WeThePeople's Team Pivotal seatpost is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and it's 200mm long for plenty of adjustability.
Dimension Alloy seatpost. - 1-piece forged AL-2014 - Clamp Style: Standard Rails - Material: Aluminum - Max Height: 245mm - Min Height: 35mm - Weight: 250g
FSA's Afterburner is a tough, lightweight seatpost that works great on road and mountain bikes. Its 1-piece 3D-forged aluminum construction makes it strong and stable while remaining light. And, it's super easy to adjust thanks to the convenient 2-bolt clamp.
3T's Ionic aluminum seatpost is stiff, durable, and features their Driftlock seat clamp assembly for 25mm of setback. This gives you the option of a more rearward position on today’s shorter framesets. The splined aluminum DiffLock coupling is a highly accurate method of setting saddle angle needing only lightweight clamping by side-mounted bolts. It is especially useful for fine adjustment of saddle setback, which can be done without impacting saddle angle.
3T's Stylus is a fresh take on the 2-bolt aluminum seatpost. The transition from the pillar to the saddle clamp assembly is a finned, rearward swoosh suggestive in shape of the classic one-bolt posts of yore. But the clamp bolts are deployed to either side of the saddle-support cradle, conferring greater stability and easier adjustment. The Stylus 25 places the seat clamp assembly with 25mm of setback for a rearward position on the bike.
Ritchey's one-bolt Superlogic Carbon is one of the lightest, toughest seatpost designs in the world. - Patented SideBinder clamp design uses a single 5mm bolt for quick, secure adjustment - Precision forged alloy clamp assembly for strength - Low-profile head for optimal saddle clearance and sleek lines - Wide saddle clamp reduces stress on lightweight saddle rails - Interchangeable clamps provide compatibiliy for all popular rail sizes - Carbon Monocoque Construction - Available in 27.2, 30.9 & 31.6mm diameters - Available in 350 & 400mm lengths - 25mm Offset - 7x7mm saddle rail clamp included - Saddle Clamp Torque Spec: 12Nm - 148g (27.2/300)
Ritchey's Superlogic Carbon LINK reinvents the two-bolt seatpost, making it lighter, more compliant, and more versatile than ever. - Patented LINK clamp works with all standard saddle rail designs as well as Ritchey Vector Evo and Selle Italia MonoLink saddles with separate adapter - LINK Carbon Posts use FlexLogic carbon layup developed for ProTour team bikes from Stevens, Canyon and Scott – 15% more vertically compliant with no loss of lateral or torsional stiffness - 15mm of offset and a reversible clamp which allows for an additional 10mm of fore-aft saddle adjustment - Monocoque Carbon Construction - Diameters: 27.2, 30.9, 31.6mm - Offset: 15mm - Reversible clamp allows for an additional 10mm of fore-aft saddle adjustment - Lengths: 350, 400mm - Matte UD carbon finish - 145g (27.2x350)
Ionic is a seatpost design featuring the sophisticated and robust, 3T–exclusive DiffLock seat clamp. Ionic–0 places the seat clamp assembly in line with the seatpost for zero setback. Many athletes seeking outright speed favor this more forward position on the bike. Some frame designers are also specifying a slacker seat tube so riders can set their bike up with an inline post, which is lighter than a setback post. The splined alloy DiffLock coupling is a highly accurate method of setting saddle angle, needing only lightweight clamping by side-mounted bolts. It is especially useful for fine adjustment of saddle setback, which can be done without impacting saddle angle. Ionic–0 LTD is a monocoque in high-modulus carbon fiber, finished in UD Gloss Black. - Alloy Difflock seat clamp fits only saddles with 7mm round-section rails - Clamp Style: Standard Rails - Color: Black
Dimension Suspension Seatpost - Clamp Style: Std Rails - Diameter: 27.2mm - Length: 350mm - Material: Aluminum - Max Height: 255mm - Min Height: 130mm - Offset (mm): 0mm - Seatpost Type: Suspension - Travel (mm): 35mm - Weight: 450g
- Carbon body dropper with molded-in cable interface and saddle cradle - Superlight Recourse cable with carbon remote lever and titanium bolts - 65mm drop from a hydraulically locked, air sprung cartridge, for XC/Enduro use - Stationary remote cable routing on side of post - 400mm length
Page 1 of 4 Next page