Parts

The Service Course SL-80 provides comfortable and efficient positions on the bar tops, brake hoods, or down in the drops. The bar allows a neutral wrist position on the drops and a flat brake-hood transition. This minimizes the need for up-rotated bars. Drops are angled outward by 4 degrees, reducing wrist strain. Named after its 80mm reach to bring the hoods and control levers back where you want them. The ergonomic 125mm drop places the angled drop position where you can easily reach it while maintaining a neutral wrist angle. The SL-80's rounded bar top is clip-on compatible. Forged from lightweight 7075 aluminum. - Distinctive Zipp cosmetics - 7050 Aluminum - 80mm reach/125mm drop designed to fit a large number of riders - Clip-on compatible - Lifetime warranty

Grips are a key point of contact between you and your bike. Comfortable grips are a must-have. Product details - Designed for use on kids' bikes without shifters - Set of two grips Specifications - Length: 107mm - Diameter: 22.2mm - End Type: Closed - Lock-on: No - Material: Kraton Rubber

Get back on the road with genuine replacement parts. - For optimal aerodynamic benefit - Choose flush cut or exposed steerer - Only compatible with the Madone Gen 7 barstem

Original equipment replacement seatpost clamps. - See spec chart for available diameters and compatibility - For specific compatibility concerns, please contact our Customer Service team

Bolts, clamps and washers for Thomson Seatposts and Seat Clamps. - Sold individually, includes bolt, washer and nut

Eliminate noise and never lose your seat stay pins again with this pair of locking style pins. Great upgrade on any TerraTrike (not compatible with Edge). OEM replacement part.

- Mountain-bike shifters built into linear pull-compatible brake levers - Aluminum - Left: triple chainring; Right: 8-speed - Cables and housing included

• Forged aluminum • Classic streamlined shape • 2-bolt clamp • 180mm tall

- Forged aluminum - 7/8-inch seat-clamp diameter - 165 grams

• Forged aluminum • Integrated micro-adjust seat clamp

•Mountain and road touring cantilever design •Forged aluminum construction •Linear spring with quick tool adjust •185g each

- Replacement front cable hanger - Aluminum construction

• Square taper interface • Only includes left crank

- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front

- Replacement link wire for cantilever brakes

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

- Ergonomic grips available in standard and single twist-shift configurations - Larger palm area displaces weight and reduces numbness and fatigue during longer rides - Single-sided lock on prevents twisting and other grip movements

- Oversized exerciser-style platform pedals with molded tread - Toe straps included - Fits most exercise bikes

• Soft foam • w/End plugs • 125mm

- One-piece bottom bracket cup set - Bearings included - Shell: 68mm - Spindle Type: OPC - Cup Material: Steel - Weight: 265 grams

- Steel 1/2 x 3/32 derailleur chain - For use with index shifting systems - For 7-/8-speed drivetrains - 300 grams - 132-link chain is extra long for bicycles like foot-forward-design cruisers

• Fits most road drop handlebars • 4-piece set • Durable, soft foam • Includes end plugs

- Steel body - Steel cups - Chromoly spindle - Sealed bearings - Interface: English - Square Taper JIS - Weight: 305-320 grams

- Forged steel body - Alloy cups - Chromoly spindle - Sealed bearings - Interface: English - Spindle Type: Square Taper JIS - Weight: 290-300 grams

- Chrome allen seat binder bolt

• Easy-on, easy-off • Available in two chain widths and two colors • Available in six teeth sizes

- Universal design - Use: Fits single rail

- Steel cups - Steel retainer bearings - Available in chrome or black - S.H.I.S.: EC34/28.6-26tpi|EC34/30 - Steerer Dia: 28.6mm - Cup Dia: 34mm - Race Dia: 30mm - Stack Ht: 40mm Size: 1-1/8"

- Complete cable kits for internal three speed hubs

- Heavy-duty nylon toe straps with classic style steel buckles - Narrow design fits most cage style pedals - 460mm length

• Designed for caliper & cantilever brakes • Steel construction • 22.2mm (7/8") clamp • 200 grams pair

The Shimano 105 double crankset balances weight and efficiency without sacrificing stiffness. It offers Rider Tuned performance with numerous gear combinations, and the wider gear pitch increases chain clearance with small gearings and allows for as short as 410mm chain stays. - Hollowtech II construction - 11-speed - 110mm Shimano Asymmetric BCD

- Special single gear design with chain tensioner - Revised tooth profile to prevent chain skip - MODEL NO: CS-S500 - SERIES: SHIMANO ALFINE S7000/S700 Series - Gear thickness (mm): 2.0 - Recommended chain: Super Narrow HG for 9-speed

Shimano BB-ES300 Octalink V2 Bottom Brackets - Fits Shimano Octalink V2 Spline Cranksets - Crankarm fixing bolts not included

- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested

Shimano's SM-RT64 disc brake rotors deliver powerful and consistent braking performance in all riding conditions. SHimano's Center Lock mounting system makes installing and removing disc brake rotors quick and easy thanks to the spline mount and lock ring design. - Compatible with both resin and metal pads - Includes external type rotor lockring

Shimano's 11-speed SLX cassette features the same computer-designed shift profiles that have made Shimano shifting synonymous with speed and accuracy. - Series: SLX - Average Weight: 467g

Shimano's Ultegra bottom bracket uses Pro Tour-proven technology for lighter weight and super smooth spinning, while still maintaining the same level of durability and stiffness. It's available in English, Italian, or Press Fit models.

An integral part of the Shimano Ultegra 12-speed road lineup, the FC-R8100 crankset builds upon Shimano's legendary front shifting and transmission efficiency. With new refinements for seamless 12-speed shifting, the Ultegra crank is now offered in a wide variety of lengths, bringing performance and improved fit for smaller riders, triathletes, and riders with specific biomechanic requirements. - Optimal balance of stiffness, strength, weight and rotational performance - Hollowglide structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting - 148mm Q-factor - 44.5mm chainline

- High-performance gear combinations provide superior rider choice - Hub body to fit a variety of bikes from MTB to road - Model Number: CS-HG800-11 - Series: Shimano - Average Weight: 335 grams

Shimano Ultegra R8000 crankset. - Optimized lightweight crank arm design produces excellent power transfer efficiency - Minimized weight without sacrificing stiffness - Hollowtech II - Rider tuned gear performance through various gear combinations - Possible to choose the best choice for ride - Redesigned FC for greater frame compatibility - Wider gear pitch increases clearance between chain and leading teeth to provide compatibility with frames with O.L.D. 135mm and 410mm chain stay length - Model Number : FC-R8000 - Series: Ultegra - Crank Construction: Hollowtech II - Crank Arm Length : 165, 170, 172.5, 175mm - Bottom Bracket : SM-BBR60/SM-BBR60-PB - Chain Line: 43.5 - Average Weight: 690 grams (53-39T), 681 grams (52-36T), 674 grams (50-34T), 668 grams (46-36T)

Need a hand-friendly quick-release with some major bling? Then Salsa's Flip-Lock Seat Clamps are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette. - Machined 6061-AL with stainless steel pivot and bolt - Anodized with laser-etched logo - Integrated Flip-Off lever - 30.0 clamp for most Salsa steel frames - 30.6 clamp for most Salsa Scandium frames - For smooth operation, lightly grease the bolt threads and keep all parts clean

Salsa's Guide Stem is lightweight, durable, and provides excellent steering response on the road or trail. - Bead-blasted, then anodized - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation - Stack Height: 40

- Brake casing has internal lining and external plastic coating - Length: 30m

Flat Mount Disc Caliper Bracket Bolts

SRAM's Force WiFli Rear derailleur is made for wide-range 2x10 systems. Its long cage can handle an 11-32 cassette! You get the huge gear range of a triple with reduced weight and better shifting. Of course, the WiFli still uses SRAM's renowned Exact Actuation technology for precision shifts every time. Plus, the Force is crafted with cutting-edge materials, such as a super-light carbon cage and a magnesium inner link for feathery low weight, flawless shifting and reliability.

SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.

SRAM's 1050 10-Speed Cassette is a great choice. It's constructed of light and durable materials and boasts SRAM's PowerGlide tooth profiles and shift ramps for quick and positive gear changes every time. This trick cassette also sports a semi-spider construction for a maximum stiffness-to-weight ratio and is available in myriad configurations to suit all your riding. There are even models with 36-tooth largest cogs for super-easy climbing.

SRAM's 1070 10-Speed Cassette is a great choice. It's constructed of light and durable materials and boasts SRAM's PowerGlide tooth profiles and shift ramps for quick and positive gear changes every time. This trick cassette also sports a semi-spider construction for a maximum stiffness-to-weight ratio, a lightweight aluminum lockring, and is available in myriad configurations to suit all your riding. There are even models with 36-tooth largest cogs for super-easy climbing.

These are the correct connecting links for SRAM's PowerLink 9-speed chains. They are great for installing new chains and fixing chains on the road and trail, too.

These are the correct connecting links for SRAM's PowerLink 8-speed chains. They are great for installing new chains and fixing chains on the road and trail, too.

These are the correct connecting links for SRAM's 10-speed chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in packs of four.

These are the correct connecting links for SRAM's 11-speed chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

SRAM's X5 10-Speed Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum construction keeps the weight down, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts.

SRAM's X5 9-Speed Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum construction keeps the weight down, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts.

RaceFace Narrow Wide Chainrings feature tooth profiling for chain retention and a blend of weight and durability suitable for XC, DH, and everything in-between. - 7075-T6 aluminum, aerospace grade strength - Compatible with 9, 10, 11 and 12 speed - Stiff 4mm plate thickness and I-beam construction transfer loads without flexing - Reversible laser etched graphics - Non-threaded bolt holes

- Superlight CNC machined 6061 aluminum spacers for fine-tuning stem height - Includes one each 3, 5, 10mm spacers and two each 1mm spacers

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.